Chuyên sửa Servo FANUC, nguồn, Spindle FANUC giá rẻ

Công ty TNHH điện tử công nghiệp Ritech chuyên sửa chữa servo amplifier Fanuc, Power supply Fanuc, Spindle amplifier FanucGiá rẻ, uy tín, chuyên nghiệp nhất trên toàn quốc. Đảm bảo sửa được tất cả các lỗi thường gặp ở các thiết bị Fanuc. Với trên 10 năm kinh nghiệm trong lĩnh vực sửa chữa máy CNC, sửa chữa Servo Fanuc, nguồn Fanuc, Spindle trục chính Fanuc. Với đội ngũ kỹ sư giỏi được đào tạo từ các trường đại học danh tiếng đã hội tụ về Ritech trực tiếp sửa chữa không qua trung gian luôn đảm bảo thời gian sửa chữa servo Fanuc là nhanh nhất và giá thành sửa chữa là rẻ nhất Hà Nội

=> Liên hệ trực tiếp hotline: 0979578581 để được hỗ trợ kỹ thuật

Thiết bị Test Servo đầy đủ duy nhất tại Việt Nam

RITECH CHUYÊN SỬA CHỮA CÁC MÃ LỖI THƯỜNG GẶP Ở CÁC THIẾT BỊ FANUC

✓ Các mã lỗi thường xảy ra ở bộ nguồn Power supply Fanuc

Alarm Code 1 :  The main circuit power module (IPM) has detected an abnormal condition.
Alarm Code 2 :  A cooling fan for the control circuit has stopped
Alarm Code 3 :  The temperature of the main circuit heat sink has risen abnormally
Alarm Code 4 :  In the main circuit, the DC voltage (DC link) has dropped
Alarm Code 5 :  The main circuit capacitor was not recharged within the specified time.
Alarm Code 6 :  The control power supply voltage decrease.
Alarm Code 7 :  In the main circuit, the DC voltage at the DC link is abnormally high.
Alarm Code 8 :  There is excessive short-term regenerative power.
Alarm Code A:  A cooling fan of external cooling fin has stopped.
Alarm Code E :  The input power supply is abnormal (open phase).
Alarm Code H :  The temperature of the regenerative resistor has arisen abnormally.

Sửa chữa servo Amplifier Fanuc

✓ Các mã lỗi thường xảy ra ở Servo Amplifier Fanuc

Alarm Code 1 :  Inverter: internal cooling fan stopped
Alarm Code 2 :  Inverter: control power supply undervoltage
Alarm Code 5 :  Inverter: DC link undervoltage
Alarm Code 6 :  Inverter: overheat
Alarm Code F :  Innverter: cooling fan stopped of the radiator
Alarm Code P :  Communication error between amplifier and module
Alarm Code 8 :  Inverter: DC link current alarm
Alarm Code 9. : Inverter: IPM alarm
Alarm Code “-” Blinking :  Inverter: abnormal control power supply

sua chua servo amplifier fanuc

✓ Các mã lỗi thường xảy ra ở Spindle Amplifier Fanuc

Alarm Code 01 :  The inside temperature of the motor is higher than the specified temperature.
Alarm Code 02 :  The actual motor speed is largely deviated from the commanded speed.
Alarm Code 03 :  The fuse of the DC link has blown.
Alarm Code 06 :  The temperature sensor is abnormal, or the temperature sensor cable is broken.
Alarm Code 07 :  The motor rotates at a speed exceeding 115% (standard setting) of the maximum allowable speed.
Alarm Code 09 :  The temperature of the heat sink of the SPM main circuit has risen abnormally.
Alarm Code 12 :  An excessively large current flowed into the DC link of the main circuit.
Alarm Codes 19 and 20 :  The offset voltage of the phase U (alarm code 19) or phase V (alarm code 20) current detection circuit is excessively high
Alarm Code 24 :  Serial communication data transferred between the CNC and spindle amplifier module contains an error.
Alarm Code 56 :  The cooling fan for the control circuit section has stopped.

Thiết bị sửa chữa hiện đại

Dịch vụ sửa chữa thiết bị Fanuc nhanh chóng, chuyên nghiệp, giá rẻ nhất Hà Nội

✓ Kỹ sư sửa chữa trải qua các khóa huấn luyện nâng cao kỹ thuật sẽ phục vụ chu đáo và chất lượng

✓ Dịch vụ nhanh chóng và chuyên nghiệp

✓ Chi phí sửa chữa hợp lý

✓ Linh kiện sửa chữa luôn có sẵn , linh kiện thay thế hoàn toàn mới 100%

✓ Dịch vụ bảo hành sau sửa chữa lâu dài

Sửa chữa servo Amplifier Fanuc

Trả lời

Email của bạn sẽ không được hiển thị công khai.